Pages

Monday, November 24, 2014

Hot Springs as an Ntrak only module

This past weekend the Hot Springs Junction Ntrak module was used in Peninsula Ntrak's layout at the annual Thanksgiving train show held at the Alameda County Fairgrounds in Pleasanton, California.  This was the first time I had this module in the layout without the AsiaNrail layout also attached to it.

Here is a view of the front of the module as it appeared in the layout.  In this layout, the module was much more visible to the visiting public than in the junction configuration with the AisaNrail modules in front of it.

Here is a view looking down the length of the module.  My JR 115 type train can be seen at the station platform.  The line that would go the the AsiaNrail track is long enough to switch this 3 car train into the station stub track.

In this layout fellow Peninsula Ntrak member Joe Giacomini's American prototype 8 ft module set which also as the mountain division was next to the Hot Springs Junction giving us a total of 12 feet of mountain division track to run the 115 on.



For this layout, I mounted the control panel on the back of the module and this worked out just as planned.  Between Joe and I we have a total of 18 feet of Ntrak modules with the mountain division track but no way to complete a turn around.  We are discussing the possibility of using a portable automatic point to point system in the future.  Perfect for double ended Japanese passenger trains.

Passing through the Hot Springs Junction module on the Ntrak red line is one of Paul Ingraham's Australian freight trains.

One of the details I added recently is a fisherman on the bank of the river.   He can been seen in this photo between the tree and the bridge.

One of Peninsula Ntrak's original club corners was re-built several years ago by members Earl and Julia Jackson as a Japanese village on the inner side of the curve and an agricultural scene on the outer side of the curve.

No comments:

Post a Comment