Some trains we rode on this trip

Anyone visiting Japan will ride a variety of trains.  These are some of the more notable ones we rode this time.

E257 Azusa Kaiji

While waiting for a Chuo / Sobu local train at Iidabashi station in Tokyo I spotted this colorful train passing through and got this photo.



A few days later we were lucky enough to ride this train from Shinjuku station in Tokyo to Matsumoto in Nagano prefecture.  The E257's are used for limited express service over the Chuo line.  I also saw several of the older 351 series Super Azusa trains were still running on this line.

Many trains in Japan have a train map sign in the space between the cars.  I often get a photo of these for reference and here is the one from this train.  Our train had 11 cars but I understand they sometimes run as 7 or 9 car sets.

700 Shinkansen

We did not buy a JR pass this time so the only Shinkansen we rode this trip was a Kodama service 700 train one way between Nagoya and Shinagawa station in Tokyo.



All the trains I saw running on the Tokaido Shinkansen line were 700's so it looks like these have taken over all services on this line.


205 Series Nambu line

The Nambu line runs between Tachikawa and Kawasaki following the Tama River and crosses the Tokyu Meguro line at Musashi-Koysugi where this photo was taken.


The 205 series has been around since 1984 and has been replaced on most lines that it had run on.  The only lines I saw still running 205's in the Tokyo area were the Nambu & Saikyo lines.


Tokyu 6000 

One of Tokyu's more interesting looking trains, they run on the Tokyu Toyoko line from Shibuya station in Tokyo to Yokohama.  The Toyoko line crosses the Tokyu Meguro line at Den-en-chofu.


Hakone-Tozan 1000

The Hakone-Tozan line is a mountain railroad, with switchbacks and 8% grades climbing over 500m in it's 15km run between Odawara and Gora where this photo was taken.



E231 Series

This type of train is used on a number of lines around Tokyo.  The orange and green stripes mean this one is either a Tokaido Main line or Shonan-Shinjuku line train.  They can be up to 15 cars long including a couple of double decked cars.

Visiting the prototype

During much of November Nona and I were in Japan and much of that time in Musashi-Koyama.  This was my 4th trip to Japan, and each trip has been unique.  This time I was seeing Japan in a different season than any of my other trips and visited some new places. 

This was the view from our 4th floor hotel room window in Musashi-Koyama looking east at sunset.  The Tokyo Tower can be seen just to the right of the center of this photo.  We were lucky to have a large expanse of shorter buildings to get this view.


It's been awhile since I posted anything on this blog as I had been catching up on DCC installations as well as getting ready for this trip.  I've also been rebuilding one of my 19 year old Ntrak modules.

This is what replaced the old overhead station.  There is a Tokyu food store on the upper levels and an assortment of small shops on the ground level.
The subway station is in the first basement level with entries on each side of the store building and the platforms another level down from there.

I came home from this trip with lots of photos and some new ideas for things to put on the Musashi-Koyama modules and other possible future Japanese themed modules.  In the weeks and months ahead I'll be posting more prototype information as well as further progress on the modules.

You can never have too many people

When your N scale model railroad is Tokyo you need lots of N scale people.

Adding people and creating little scenes that tell a story have always been enjoyable to me.  Modeling passenger trains and stations in Japan means more opportunity to do this.

There is a wide variety of N Scale Japanese people sets available from Kato and Tomytec.  

 

I purposely created a walkway area along part of the front of the module connecting one of the station entrances to the street as a place to display some people.
  


The food vendors are from the Kato lunch vendors, set # 24-262.  The other figures are walking passengers from various sets.



I've tried two different adhesives to attach N scale people.  The Accent Glue from Woodland Scenics works great on a stationary layout.  It comes a brush attached to the lid.

On modules I've had the best results with Walthers Goo.  Use a toothpick or bamboo skewer to apply a small amount.

So far I have about 50 people on the modules, most of those on the station platform.  As I add more and create some little scenes, I will present them in future posts.

The Emperor's Train

Another friend from Peninsula Ntrak who collects Japanese trains is Richard Porter.

Here is Richard running his Kato model of the Japanese Emperor's special train on the AsiaNrail layout.

 

The train is shown here passing Paul's model of the Byodoin Temple Phoenix Hall.

He built this from a Fujimi kit.  The real one is in Kyoto and there is also a full sized replica in Hawaii.


Perhaps the Temple looks familiar even if you've never been there.  That's because the replica on Oahu's north shore is a favorite filming location and has been featured in the TV shows Hawaii Five-0, Magnum, PI, and Lost, and in the movie Pearl Harbor.


In this last view of the train the E58 locomotive is disappearing behind the banana trees on one of the more tropical areas of the AsiaNrail layout.

First Exhibition

July 8th, 9th, and 10th the Musashi-Koyama modules were part of the AsiaNrail layout at the 2011 NMRA National Train Show in Sacramento, California.  Over the 3 days the show was attended by more than 20,000 people.

Besides my 2 modules, all of the other modules were done by Paul Ingraham.  We were assisted with the setup of the layout and at various times the operation of it by Tom VanHorn, Phillip Cook, Richard Porter, and Mike Sheridan.

The layout consisted of several of Paul's junction and curved modules forming a irregular circle and 4 peninsulas going off from this covering an overall area of 20 x 20 feet. 



The 4 peninsulas represented Tokyo (my modules), Taiwan, South Korea, and a undecorated staging yard.


Here is a view of one of Paul's trains leaving Musashi-Koyama station.  Hopefully before the next showing of these modules I will get the grade crossings installed !

Independent from the main line operation we had a point to point passenger operation between the Tokyo and South Korea peninsulas using a wide variety of trains.  Here is a Super Ozora 283 train at the Musashi-Koyama platform.

We were joined by Phillip Cook of the Japan Rail Modelers of Washington DC.  He brought with him a nice selection of short passenger trains to run. Here he is operating the yard on the South Korea module which served as the other end of the point to point operation.

Everything worked well on the Musashi-Koyama modules and the trains ran smoothly.  A point did come loose on one of the Micro Engineering turnouts but I was quickly able to repair it.  I do consider this first outing for these modules to have been a great success and will be continuing to build the scenery for them and look forward to future exhibitions.

Ready to go !

The months of preparation leading up to the National Train Show have passed and it's time to actually display the Musashi-Koyama modules and run some trains !

Here is the module set assembled in my garage just prior to loading it for the trip to Sacramento.

There is still so much that I still want to do with buildings and details, and work on the modules will continue after this show prehaps at a somewhat slower pace.


If you are going to the show, look for the AsiaN Rail layout in area 813 which is right in the middle. 

Hours:  12:00pm to 6:00pm Friday, July 8th
            10:00am to 6:00pm Saturday, July 9th
            10:00am to 5:00pm Sunday, July 10th

Location:  2011 NMRA National Train Show
                Sacramento Convention Center
                1400 J Street
                Sacramento, California

Movable track bumpers

June came and went with only one post to this blog.  Part of the month Nona and I drove to the Dallas, Texas area to pick up a travel trailer that we had purchased.

Over this 4th of July weekend I have been making final preparations to take these modules for their first exhibition in Sacramento as part of the AsiaNrail layout. On Friday, I took the modules over the Paul Ingrahams place as he had most of the rest of the layout set up in his garage and we wanted to work out any bugs with getting the Musashi-Koyama modules into the layout ahead of time.  I am happy to say that any problems were small and have already been solved.

The modules can be used in a number of different ways and for this layout this is going to be an end of line terminal station.  The last thing one wants to the have a train overshoot the end of the line and fall several hundred scale feet to the floor !  So I needed to come up with some track bumpers.

What I came up with was to shape scrapes of 1/2 inch plywood and painting them a concrete color.  Then I drilled a pair of 1/8 inch holes and inserted 1/8 inch styrene tubes with Walthers Goo to secure secure them.
From the same pattern used to drill the holes in the bumpers, Holes are drilled on the center line of the roadbeds at each end of the module.  When this end of the module connects to another part of the AsiaNrail layout, the holes will be covered by connecting tracks.

Styrene strip was painted black, and then attached to the flat side of the bumpers.  Then some safety striping was cut from a sticker set and applied to the styrene.  These can now be moved to wherever they are needed depending on the use of the modules in a layout.