Thursday, January 24, 2013
Painting the small Green Max station
I found this photo on the Internet of one of these kits that had been completed and liked the colors used for the building and roof.
Here are some of the major parts after being painted. I did keep close to the same color scheme but reversed the base and trim colors of the building using Floquil antique white for the walls and reefer white for the trim.
Floquil oxide red applied with an airbrush was used for the roof and I decided to give it a little more variety using engine black for the railings. Not shown in the photo I used Floquil concrete for the base. The base was already about the right color but I find that everything looks too plastic unless its painted so I paint nearly everything in an unpainted kit.
Realizing that it would be hard to reach many of the details after the building was fully assembled, I hand painted those at this stage.
Next I'll be working on applying some colorful signage to this station.
Sunday, January 20, 2013
Modeling Tokyo taxi cabs
Any model scene of Tokyo should include some taxi cabs, this is especially true when a train station is part of that scene. I have been wishing for some time that TomyTec would release a set of modern taxis.
Recently I got my wish when I found these 4 taxi sets by TomyTec and Kato on ebay. The TomyTec set included 2 Toyota Crowns and 2 Toyota Prius models. The Kato set had 4 sedans but I'm not sure of the make or model.
Here's a comparsion of the 3 different models. The TomyTec taxis have all the same great detail of their other recent vehicles.
Both TomyTec and Kato taxis even had green license plates like the taxis do in Tokyo. The TomyTec taxis all came with the same rooftop lantern but the Kato set came with a variety of lanterns as separate parts.
So now I have the beginnings of a Tokyo taxi fleet. During the subway construction period I model there was no proper taxi stand at Musashi-Koyama station. A short distance from the station the taxis would line up along the street.
Recently I got my wish when I found these 4 taxi sets by TomyTec and Kato on ebay. The TomyTec set included 2 Toyota Crowns and 2 Toyota Prius models. The Kato set had 4 sedans but I'm not sure of the make or model.
Here's a comparsion of the 3 different models. The TomyTec taxis have all the same great detail of their other recent vehicles.
Both TomyTec and Kato taxis even had green license plates like the taxis do in Tokyo. The TomyTec taxis all came with the same rooftop lantern but the Kato set came with a variety of lanterns as separate parts.
So now I have the beginnings of a Tokyo taxi fleet. During the subway construction period I model there was no proper taxi stand at Musashi-Koyama station. A short distance from the station the taxis would line up along the street.
Monday, January 7, 2013
Building a small Green Max station
Cold, wet weather has been keeping me from spending much time out in the garage where the work was on the foam insulation board scenery was taking place on the Hot Springs Junction Module. As I also need a few structures for this module, I decided that it would be enjoyable to spend some indoor time building a nice Green Max structure kit.
I picked up this kit at TamTam in Tokyo during my November 2011 trip.
The instructions for the Green Max kits are on the back of the box and are in Japanese.
The illustrations are good and use numbers that match the numbers on the spues.
Unlike the Green Max houses and Green Max stores where I made some modifications, I plan to build this one just as instructed.
The Green Max kits that I have assembled have always had very clean parts and never any flash that needed to be trimmed.
At the last train show I attended I finally purchased a proper spue cutter so my cuts on this one hopefully also wont need much trimming.
I used the base to align the station walls while gluing the walls together but will leave the base unglued as I plan to paint it separately On these Green Max kits there is normally a lot of detail that needs to be hand painted after the structure is given a base color which is usually done with an air brush.
The way this building is laid out, I decided to leave two outer walls of the building loose so I could get to the details on the inner walls.
To be continued
The way this building is laid out, I decided to leave two outer walls of the building loose so I could get to the details on the inner walls.
To be continued
Tuesday, January 1, 2013
New years wishes - 2013
In Japan, it is traditional that during the time just prior to the new year, the house is given a good cleaning so that everything will be clean to start the new year. They call this Oosogi which means "Year end cleaning".
That appears to be happening in some of the households at this apartment building in Tokyo near Musashi-Koyama station. Several futons hanging from the balconies while inside, the apartments are being cleaned from top to bottom.
Another year has passed and I've very much enjoyed pursuing a variety of N scale modeling efforts, and of following those of my fellow N scalers via their blogs, web sites, and videos. While I got many things accomplished in the past year, it's never as much as I had wanted to but maybe in this new year I will.
That appears to be happening in some of the households at this apartment building in Tokyo near Musashi-Koyama station. Several futons hanging from the balconies while inside, the apartments are being cleaned from top to bottom.
Another year has passed and I've very much enjoyed pursuing a variety of N scale modeling efforts, and of following those of my fellow N scalers via their blogs, web sites, and videos. While I got many things accomplished in the past year, it's never as much as I had wanted to but maybe in this new year I will.
Happy New Year everyone
Subscribe to:
Posts (Atom)